What Paint To Use On Wooden Blinds? How To Paint Wooden Blinds

There are many ways to change your house’s look, and one of them is to repaint the blinds. However, a few people have asked, “What paint to use on wooden blinds?”

It might be a bit tiresome first when redecorating the unique shades.

Primarily, you must be careful when opting for a suitable kind of blind stain.

If not, you may damage the whole stuff. 

The article below will provide a complete guide about the topic to help you successfully give another impressive cover to the furniture.


What Paint To Use On Wooden Blinds? A Quick Answer

The acrylic-based enamel paint is suitable for refurbishing many wooden shades. Unlike other types of stains, the enamel one is more durable and easier to clean alike.

Besides, the acrylic-based feature ensures the window shades retain color over time. Before painting, remember to prepare well, disassemble and clean the shade as well as prime it. 

How To Paint Wooden Blinds? A Step-By-Step Guide

Once you have known what stain to use on wooden shades, it is crucial to understand how to decorate them impressively. There are some required tools and five steps of the whole process. 

1. Required items

You will need some items before doing the project.

First, opt for a suitable spray or paintbrush.

Do not forget the shellac spray primer and acrylic-based enamel paint. The prop must be included like a block of wood, cloth rag, tarp, and the flathead screwdriver. 

Moreover, some people use additional fabric dye to have access to a broader range of colors. 

2. Preparation

After having what you want, let’s start with the first step: preparation. That means you should choose an excellent place to stain the blinds.

The location should be isolated from living areas cause the stain needs time to dry without any interruption. 

Plus, do not forget to protect the areas around you. Put down the tarp on the floor to prevent it from any unexpected spatter. 

Besides, suppose your shades are faux or vinyl wooden; you can use a sprayer.

Then, it would help once you take advantage of the sandpaper (or sponge paper) and rough it on the shades’ surfaces. That action ensures the stain adheres better. 

By contrast, there’s no need to use the paper if there has already been the texture on the slats. 

3. Dissembling

The next step is to disassemble the slat. Use a flathead screwdriver to eliminate the wooden or plastic pegs lying in the bottom slat’s rail. Lift the slat would help do the action faster. 

Next, you can see the strings in the holes where the pegs lay. Pull them out and cut down the knot. Slightly move the bottom rail cup out of the lines then. 

After you have removed the slat fasteners, do the same with the slat strings. There are often two main strings on the shade. Pull them out through the top rail. 

Once you take them out, remember not to make them tangled. Plus, it would be better to change if the strings have not had the same color as the full shades. Make use of the sprayer or the fabric dye. If you use the previous tool, bear in mind that the amount of stain should be enough. 

Can wooden blinds be painted? (Source: allthingsheartandhome)

4. Cleaning

Never forget this step when you refurbish any household stuff.

With the window shade, you clean the slats first. Take the damp cloth to wash out any dirt, dust, and fingerprints. 

In case the grease or dirt is too hard to wash out, take the dish soap instead. 

5. Applying primer

Now, apply the shellac spray primer on each slat. The primer would increase the paint’s adhesion and make it more durable over time. 

What’s more, one of the great sides of the shellac spray primer is its flexibility. It can be used on bare wood or wood coated with oil-based or water-based stains. 

Then, take time for the primer to dry. Often, it would be best if you waited around three to five hours to do the next step. To be sure, check the primer container to see the suggested drying time. 

Remember to use a prop like a woodblock to prevent slats from sticking with the tarp or others. 

After you have done one side, flip to the other side. Priming them carefully as well and wait for them to dry. 

6. Painting

Now come to the funniest part: painting. You can use the paintbrush or paint sprayer in this part. 

With the paintbrush, remember to use the correct one. Some famous names on the market you can refer to include:

Concerning the stain, as I have just mentioned, you should use acrylic-based enamel ones. Not only is it easy to clean, but it also lasts long. I suggest you a few excellent kinds of spain for shades and other furniture recently:

The best paint for wooden blinds (Source: gariesgir)

When you use the paintbrush, move it from end to end. After you’re done, put the slat back to the tarp. Please wait for it to dry. You should check the time written on the paint canister.

Then, stain the other side of the slats and wait as well. 

The final stage is to put the slat strings and fasteners back again. 

Take a look at this video to know more about painting wooden shades: 

How To Get Rid Of Paint On Wooden Blinds?

In some cases, people might want to wipe the old stain out or fix the mistake of spilling the wrong color on the shades.

While it might be more tiresome to remove the dried paint than the wet one, there are some methods to change the situation. 

1. Chemical removers

To remove the stain on any surface, special chemical removers are the ones you should find. Either it is chalk or gloss finishes, the products still work well. 

First, spray the remover on the slats’ surfaces and wait a few minutes. After it has already soaked, use a flat scraper to pull out the paint’s layers. 

2. Paint thinner

The second product I suggest to get rid of the shades’ old color is the paint thinner.

It is a type of oil-based solvent. When you use the thinner, do not forget to wear rubber gloves.

It might cause skin irritation once you are not careful. 

Use a cloth or sponge to dab the liquid on the shades’ surface.

Then, wipe off the undesired stain. After that, remember to wash the slats with warm water to remove the paint thinner. 

3. White vinegar

A traditional way to get rid of the spilled stain quickly is white vinegar. Mix the magic liquid with water at the rate of 50/50. Take a microfiber cloth and dampen it into the mixture.

Slightly rub the wet cloth on the affected area. Then, you can wipe out the stain. 

The solution is quite helpful for PVC or faux wood Venetian shades. However, it is not applied to the dried color. 

What Paint To Use On Wooden Blinds? People Also Ask

1. Can you paint wooden blinds white?

Of course, you can stain any shades with the white color. However, one of my recommendations is that your shade’s color should be similar to the wall.

That means, if you decorate your room with pink, yellow, or blue stains, that should be your shades’ color as well. 

2. How often should you clean and paint blinds?

According to experts, you should vacuum the blinds around three to four times a week. With the deep cleaning, do that every four to six months.

After three to four years, the blinds’ stain might become dull. As a result, repaint and give it a new coat alike. 

3. Can Venetian wood blinds be painted?

Most kinds of wood blinds can be painted, including the Venetian ones. However, before staining them, bear in mind to carefully clean them with a damp cloth or dish soap.

That is to ensure the stain adheres better to the blind’s surfaces, leading to a longer lifetime.

Plus, it would be best if you used a primer before applying the color on those slats without texture. 

4. Can you stain roller blinds with chalk paint?

You can paint roller blinds with chalk paint once it is available.

Besides, I recommend you use acrylic-based enamel or fabric stain. They are durable and easy to clean. 


To sum up, above are a little information related to what paint to use on wooden blinds. 

The acrylic-based enamel paint is the suitable one for the home project. But, before doing that, remember to prepare well and clean the shades first.

Then, disassemble them and prime each slat to improve the stain’s adhesion. After painting, replace the slats and enjoy your work. 

Hopefully, you can successfully redecorate your blinds with the guides. 

Further Reading: 

Tags: #Polyurethane  #Closet #Brush #Coat #Primer #Waterproof #Paint #Spray #Blinds #Wood 

5/5 - (1 vote)
Exit mobile version