Standard kitchen sink size is one of the most important factors to consider when buying a new kitchen.
The standard kitchen sink size in the United States ranges from 30 inches by 20 inches to 36 inches by 24 inches, but it can be as small as 22 or 26-inch squares depending on your needs.
A larger kitchen sink will generally have more functions and features than a smaller one, so if you are unsure about which size you need, review our guide below for help choosing the right size sink for your home.
Do you know Standard kitchen sink size?
The most common size for a kitchen sink is 30″ or 33″. Standard sizes could be anywhere from 24″ to 36″. Most sinks will be in this range.
The standard kitchen sink size is 24″ wide and the bowl is 20″ wide, 12.5 inches deep. This site is based on an average of 3 feet of counter space and a standard 36-inch kitchen sink base cabinet. The standard drain opening location is centered in the back wall and the top of the sinks’ “lip” is approximately 34 inches from the floor; this will vary slightly depending on how much clearance you prefer beneath your sink (the deeper the bowl, the lower it sits).
This size makes for a nice all-purpose sink whether you want to wash dishes, do pots & pans or even use it as an extra work surface. I’ve updated my post with some additional measurements, including those made by one of our readers here which allows folks with less than 24″ of space to use this size for smaller projects.
What about the sides of the sink?
The sides should not exceed five inches in depth (if they do, your room is too narrow) and they should be perfectly vertical or slanted just enough to allow for drainage.
This is the classic layout of a standard kitchen sink, but there are many variations on it that have become popular too, especially in new construction. One of these is “Reverse mount”. Instead of having the drain centered behind the bowl, it is moved to one side so that your sinks can share a single base cabinet or wall-mounted cupboard.
Another recent design trend has been under-mount sinks where the bowl sits completely below the countertop giving more clearance space around them which is great if you have cabinets with doors opening over them. But this setup has one major drawback – an undermount sink installation will usually require two separate holes to be cut in your countertop for each bowl in a staggered position in order to center the drain in a wall-mounted cabinet.
Dual Bowl vs Single Bowl Sink?
Most standard kitchen sinks are single bowls which means they have one continuous flat porcelain surface. However, if you need additional prep space, you might consider getting a double bowl sink; two separate flat surfaces divided by a partition.
Drain Placement: Centerset vs Offset? Most kitchen sinks are centered unless there is plumbing or piping in the way; then you might consider an offset drain. For example, an offset drain will allow you to center your dishwasher even if its plumbing runs to one side of the sink.
Undermount Sinks – Rolling vs Stamped?
There are two primary types of under-mount sinks – stamped and rolled. A rolled edge has a flexible piece of metal shaped into a curve that provides more contouring than a stamped edge which is flat across the top.
Sink Sizes – Depth & Width Standard Kitchen Sink
Dimensions
- Width: 24″ or 30″
- depth: 20″
- undermount bowl size: 16″ x 13.5″
- overall dimensions: 25 1/2″ x 22″
This is what you’ll typically find in most homes today since it fits well with granite countertops.
Standard Bathroom Sink Dimensions
- Width: 18″
- depth: 16″
- undermount bowl size : 15.5″ x 10.25″
- dimensions (overall) : 19 3/8″ x 14 1/8″
This is a popular sink size and it’s great for powder rooms and smaller bathrooms where space is limited.
Standard Kitchen Sink Size (cre:cabinets)
What size is a standard double kitchen sink?
One of the most popular questions asked is about the standard size for a double kitchen sink. A good person to give you advice would be someone in plumbing since this means giving out dimensions and we don’t want any bad surprises, like not having enough space where you need it.
There are many variables that can make changing or adding a new kitchen sink difficult: appliances on either side, especially if they’re huge; cabinets; and lighting fixtures. All of these factors will change how your flooring and countertops look with the new addition.
It’s never too early to get an idea of what you’d like to get done before entering into changing your whole kitchen around!
Standard Kitchen Sink Size: A Self-Rimming Sink usually measures 32″ front to back by 22″ wide.
There are certain measurements that need to be kept in mind for this size, like a cabinet or wall space, electrical outlets (usually underneath the sink), and most importantly appliances ( i.e.: stove ) . An undermount sink is usually 30-1/4” front to back by 20-7/8” wide; however, there are variations with brand names. It is advisable that you check out measurement specifics before purchasing your new kitchen sink(s).
A single standard Sink measures about 28″ front to back by 22″ wide. The measurements for installation of a single sink will vary depending on whether it is installed with countertops or sits on top of cabinets. Measurements for both options are available through the manufacturers.
Porcelain Enamel Sinks are typically less expensive than stainless steel sinks, but also tend to be lighter weight and can chip or crack.
Some of these types of sinks come pre-sealed with a “bash guard”, which is a thin layer of protection on the bottom part of the sink that prevents damage from being dropped or banged on it. Once porcelain enamel chips or cracks, there’s no repair for it short of resurfacing the entire sink.
If you have young children in your home who might drop dishes into your sink or dent/scratch them during use, this type of material probably isn’t right for you. Porcelain enamel is also not recommended for areas where there’s a great deal of temperature fluctuation ( i.e.: above/below zero degrees Celsius ).
Stainless steel is the most common countertop material used today, and it will last much longer than the other types of materials.
It is also more expensive, but holds up better to daily use, temperature changes and damage from dropping or denting. Like porcelain enamel, this type of sink does not usually require sealing.
The Country Farmhouse Sink features an asymmetrical design with equal size left and right-hand bowls each with two front bowl drains for added installation flexibility.
The depth of this farmhouse sink provides kitchen makers with deeper bowls for easier cleaning as well as installation flexibility where the depth can be used in less traditional areas like the laundry room.
- Bowl Width: 16-1/2″ (left) & 16-5/8″ (right)
- Bowl Depth: 8-3/4″ left & right | Sink Length: 33″ front to back
Country Farmhouse Sinks are handmade in North America – see our warranty information here .
The standard single sink measures about 28” front to back by 22” wide, but with all of these different factors, it’s important for you to measure your space and design accordingly.
The majority of sinks will need at least a 20-inch space behind the bowl after installation so that you can access both sides of the sink without having large appliances interfere. A few of the most popular kitchen sink designs:
Undermount Sink
– This style of sink is mounted underneath the counter and has a lip that hangs over the edge of the cabinet. Garbage disposal units are usually installed in this type of sink, but it’s also possible to install a dishwasher or water filter.
Undermount sinks are typically more expensive than surface-mounted sinks because you need to have custom cabinets built to fit around them.
They are also easier to clean since they can be wiped down under the hanging lip, which is inaccessible when fitted into an under-mount space.
Surface-Mount Sink
– The main difference between this type of sink installation and traditional installation methods is that the countertop material will extend up over where it meets the sink.
The benefit is that you don’t need additional cabinets to install the sink, but this also makes it less easy to clean since there’s no place for dirt and debris to collect.
This type of installation is best suited for use with drop-in sinks where space behind the bowl isn’t an issue or in temporary installations like mobile homes or RVs.
Drop-In Sink
– These are more expensive than traditional installation methods but easier to fit into existing countertops like laminate or Formica.
They usually require a little bit of custom measuring on your part so that they can be set inside your cabinet while not protruding beyond the edge of your countertop material. Since it doesn’t set below the countertop line, it’s not as easy to clean.
However, it is possible to install a garbage disposal or dishwasher in this type of sink.
Farmhouse Sink
– This style is similar to drop-in sinks since the countertop material extends up over where the bowl meets the front of your cabinet.
The benefit is that it saves space behind the bowl (great for smaller kitchens) and looks like an integrated part of your cabinetry rather than another piece you have to worry about cleaning.
Farmhouse sinks are also usually deeper than traditional installation methods which means you can fit larger items inside for easier cleaning without having to work around other appliances.
Standard Kitchen Sink Size (cre: homeguides)
What is the standard kitchen faucet?
The kitchen faucet is a tap or fixture that allows water to flow from a supply of fresh drinking water.
The main two types are the installed and the deck-mounted kitchen faucets. Installed means it taps into your water supply, while deck mounted does not need any plumbing attached.
There are 4 parts that makeup one standard sink faucet: base plate(handle), spout, nozzle/aerator (froth saver), and the sprayer hose.
It has 2 handles on either side which you twist to turn on cold or hot water. It is usually made out of stainless steel with chrome plating for shiny finish and durability against daily wear & tear Chrome plating also adds rust-proof and resists tarnishing.
What is a kitchen faucet cartridge?
A cartridge in this case refers to the mechanism that regulates the water flow through your faucet. A standard kitchen faucet has one cartridge.
The cartridges are usually made of plastic, ceramic, or metal. When you turn/twist the handle, a small rotor turns which switches the supply of water from hot to cold or vice versa. The keyless nature of a cartridge allows easy repair.
In comparison, an older style ball valve would require a plumber’s putty and wax rings for sealing and disassembly each time it needed repair.
Modern cartridges have up to 12 seals for better performance against leaking & dripping if not used properly! Sometimes you might hear a faucet running even though the water has been turned off. This is also because of worn cartridges, so do check it out if you need to.
What are the common types of kitchen faucets?
There are basically four kinds of standard kitchen faucets: Single handle, 2-handle (or one for hot & one for cold), pull down sprayer, and gooseneck. They come in both plated brass(gold) or stainless steel material finish depending on your preference or decoration theme.
The single-handle kitchen faucet is what it says; there is only one handle that controls both hot & cold water supply at the same time without having to change between them!
This brings ease to users especially if you have arthritis, or can’t reach well with your hands. 2-handle kitchen faucets are more common now giving the user options to switch between hot & cold water supply.
The handles are usually located on either side of your sink for convenience. Pull-out sprayer kitchen faucets are particularly useful for cleaning stubborn bits around the sink. They also come with a soap dispenser at the tip of the faucet so you don’t have to touch it 5 times every time you cook! Gooseneck kitchen faucets have longer necks which allow users to fill up larger pots & pans easily within a shorter period of time.
You might want to know how much it costs for kitchen faucet installation.
It will cost anywhere between $90 to $200 depending on the type of faucet you choose. Installing a single-handle kitchen faucet is usually easier & cheaper, whereas 2-handle faucets require more work for perfect fitting.
Gooseneck kitchen faucets are also known as “pull-out” faucets. They provide maximum space flexibility for pots & pans which need immense water filling or cleaning because of their extended necks! You can even fill up buckets with them for convenience!
Gooseneck kitchen sink sprayer is mainly used in kitchens where there is plenty of space available under the sink due to its height.
It helps make your cooking experience much better since you don’t have to bend over (bad back!) as often as you used to before.
Kitchen faucets are typically chrome or nickel finished, although some are also available with a gold finish. Some offer kitchen sink spray options for added flexibility when filling pots, cleaning dishes, etc.
Some kitchen faucets have the sink mounted on top of the counter so it has its own base under it that is separate from the main countertop
– it can be swiveled around in any direction. This is true whether the water supply comes up directly through the counter or if they have an additional hose connection at their base.
If your sink faucet is not connected to the water supply except by an external hose, then you will need to make sure this host does not kink, because it can cause problems with water pressure to your faucet. This kind of faucet is not recommended for areas where the water supply has high mineral content.
One advantage of this design is that you don’t need to install new cabinets around the sink since there is no permanent connection between it & the counter surface.
Kitchen sink sprayer models are typically used in homes where people cook more often or have larger families to accommodate (like mine!). Kitchen sink sprayers can improve your cooking experience and save precious time by allowing you to fill pots and pans, clean dishes without having to bend down as much as before! They also provide one-hand operation which helps reduce stress on back muscles if you’re standing for long periods of time.
Standard Kitchen Sink Size (cre: signaturehardware)
Gooseneck kitchen faucets provide maximum space flexibility for pots & pans which need immense water filling or cleaning because of their extended necks!
You can even fill up buckets with them for convenience! Gooseneck kitchen sink sprayer is mainly used in kitchens where there is plenty of space available under the sink due to its height.
Kitchen spout materials are typically stainless steel, brass, nickel, or chrome-plated finishing. Chrome finishes usually come as a standard but you can also opt for other material finishing depending on your preference and decoration theme.
Spouts are found attached either directly to a separate hose at the base of a pull-out sprayer, or integrated into the underside of a gooseneck faucet.
Faucets that do not have a separate hose connection, but rather attach directly to the sink’s water supply usually cannot swivel, and so they remain stationary after you’ve made the final adjustments for height and angle.
This design is suitable if there isn’t enough room for it to swivel around under your kitchen sink or if your space requires a more permanent fixture (like mine!). Kitchen sprayer models are typically used in homes where people cook more often – like mine!
A kitchen pull-down sprayer can improve your cooking experience and save precious time by allowing you to fill pots and pans without having to bend down as much as before!
They also provide one-hand operation which helps reduce stress on back muscles if you’re standing for long periods of time.
The kitchen faucet style varies depending on how the water flow is controlled, whether by a handle or a separate sprayer hose connection at the base.
The two most popular kitchen sink sprayer models are pull-down and pull-out. Pull-down models have an extension hose that is stored inside the height-adjustable spout when not in use.
It can be pulled down to provide continuous water pressure at any desired height with the touch of a simple button usually attached to either side or both sides of the spout nozzle(s). This type does not allow for changing between stream and spray modes without turning off the water supply first which makes it more suitable for “one task” applications like filling pots or cleaning dishes.
Pull-out models have a separate sprayer hose connection that is usually located under the sink at the base of the faucet. It extends out into your work area when you want to use it for tasks like washing dishes, and retracts back under the sink when not in use.
Its design allows for easier switching between stream and spray modes during operation because there are no valves or water connection hoses (like pull-down model) to turn off before changing mode. Pull-out models also allow smoother transitions between different angles by moving with less effort because their coiled springs do most of the work.
What kind of kitchen faucets are there?
There are two types: one that has integral control (handle) and one that has separate control (sprayer). However, the pull-out sprayer is most common. It can store under the sink cabinet or be mounted to the underside of a countertop, so you can roll it out when you need it by simply pulling its spray head toward you.
Generally speaking, all kitchen faucets are considered high-end kitchen fixtures because they’re usually made out of metal like brass, stainless steel, or even chrome-plated metals for added durability and long-lasting shine!
They will last your family generations if maintained well which is what makes them great investment pieces in kitchens! The only downside with these types of materials is that they require extra care to keep clean and shiny as fingerprints and water spots show up extremely easily on their reflective surfaces.
Solid chrome faucets are also a great choice if you want something that’s stylish and shiny, but not as fancy or rich in appearance as brass.
It will match anything from stainless steel appliances to light-colored ceramic tiles in your kitchen without clashing in terms of color!
Chrome plating is typically done by dipping the metal object into liquid zinc, then dunking it into liquid nickel, which deposits the chromium on top of the zinc to form an extremely thin layer that can protect against corrosion when exposed to air over time. That is why these types of finishes are popular choices with homeowners who live in coastal regions where they have hard water because chrome doesn’t rust out easily even after being exposed to saltwater.
Standard Kitchen Sink Size: Kitchen faucets that have a separate sprayer hooked up to pull-down or pull-out wand are more common in homes because it allows for the use of each type of nozzle separately from one another.
This is great for homeowners who need a quick stream from their sink’s spout before doing tasks like rinsing vegetables or dishes, and then switching over to spraying items down without having to turn off the water supply first! So what’s the difference between a pull-out and a pull-down kitchen faucet?
Pull-out kitchen faucets have either a folding hose connected to its base which you can push back into place when finished with your task.
Or they will have a coiled spring connected to the top of the nozzle which you can pull out of the spout when in use for directing water to specific areas. Pull-down kitchen faucets have a complete hose attached to the base of the unit which allows it to be pulled out and retracted back into place.
You can also get pull-out kitchen faucets with two separate handles, one for controlling the volume of water coming through the spout while the other is used for changing between stream and spray modes during operation!
If you’re looking to simplify tasks like rinsing dishes then this type of pull-out maybe your best choice due to its ease of use when switching between different modes.
However, these types of models tend to be more expensive than their traditional counterparts because they require specialized multi handle valves (sometimes called diverter valves) that can be integrated into the spout itself.
Kitchen faucets with two handles can be operated by one or both of your hands, like other types like the single handle and wall-mounted designs that we will discuss in a bit!
However, if you’re left-handed then it’s important to keep this in mind when choosing a pull-down kitchen faucet because most models are designed for right-handed users!
A great option if you’re concerned about hand dominance is getting a side-loaded stationary sprayer that can be installed on either side of your sink so that lefties and righties can use them interchangeably without hassle! You’ll usually find these at hardware stores or online appliances retailers.
Wall-mounted kitchen faucets are popular choices for home renovations and new kitchen construction if you don’t have the space to install a traditional faucet on your sink or want something clean and minimalistic for a smaller-sized basin. But how do they function exactly?
Wall-mounted models use flexible water lines that connect the main spout to its base in order to create pressure when turned on. These can either come with a stationary or pull-down sprayer in most cases, and you’ll find showerhead versions of this type too!
Kitchen Faucets:
Single Handle vs Double Handle Since I’m sure you’re all wondering at this point what the real difference is between single handle and double handle kitchen faucets, we thought we’d go ahead and explain it so everyone’s on the same page!
A single-handle kitchen faucet is just that, only one handle that controls both the volume and water pressure of water coming out of your spout.
Double-handled kitchen faucets have separate levers for controlling the flow of water (volume) and changing between stream mode and spray mode (pressure).
Even though these types may seem like they are more user-friendly because you can control each feature on its own with ease, there are some advantages to using a single-handle design in most cases.
For example, having two handles can make it difficult if someone wants to use your sink while you’re doing dishes or cooking because you’ll need two free hands in order to operate them without making a mess or burning yourself on hot liquids! Also, if you have a weak wrist or have an injury that requires you to use one hand more than the other then this type of faucet can be difficult to manage when in use.
Although it’s true that single-handle kitchen faucets are generally cheaper than double-handled models because they require fewer components for assembly, there are always exceptions depending on how complex your unit is so make sure to do your research before making a final choice! Kitchen Sink Faucet Materials Finally, when choosing the right type of faucet for your sink or basin I would suggest taking into account what material has been used in order to create the spout itself.
The most common materials used for creating kitchen faucets include ceramic, metal, and plastic or resin.
Kitchen Faucet Reviews: Our Top Picks for 2016! If you’re looking to purchase a new kitchen faucet for your home but aren’t sure which type is right for you, don’t fret because we’ve done all the research and found some of our favorite options to get you started!
Delta 9178-ARL Pilar Two Handle Kitchen Sink Faucet in Chrome
With an average 4.5 star rating over at Amazon based on well over 1,200 customer reviews, this high-end Delta faucet has been selected as one of the best designs by industry professionals and consumers alike!
This sleek and modern model will work great with any type of kitchen decor and comes with a multi-function pull-out sprayer for added control.
Delta Faucet 9192-AR-DST Cassidy Two Handle High Arc Kitchen Sink Faucet in Stainless Steel
At an affordable price of just over $150 including shipping, this Delta faucet has been gaining some traction as one of the best-rated budget-friendly choices by previous customers!
This unit is super easy to install and will look great in any type of home from classic to modern. There’s also a matching soap dispenser available if you want to make your overall experience that much better.
Conclusion
The size of the sink in a kitchen is an important consideration when purchasing or remodeling. Purchasing or remodeling to accommodate this crucial component will help you maintain your sanity and be more efficient in your day-to-day life.
For example, if you have a lot of dishes but not enough counter space, then it may make sense to get a larger sink that can do double duty as both prep area and dishwasher station. We hope these tips were helpful.
Tags: #OpenShelves #Backsplash #BasementBedroomSize #ApartmentBedroomSize #KitchenAisleWidths #HalfBathroom #BedroomWall #DiningRoomChandelier #GarageWorkbench #bedroompaint #GfciOutlet #BathroomPartition #GarageVent #BathroomSink #BathroomBench #BathroomPlumbing #BedroomLight #BathroomVent #TownhouseGarageSize #BedroomFurniture #BasementBar #BedroomLayout #livingroomlumen
Tags: #BedroomLamp #BasementStairs #BedroomEndTable #LivingRoomSet #BedroomDoor #WindowCurtain #BedroomCeiling #CeilingFan #MasterBedroom #LightBulb #NelsonBedroom #KitchenGFCI #KitchenFloorTile #KitchenExhaustDuct #KitchenTable #KitchenCounter #KitchenSink #KitchenGadgets #Hinge #KitchenCabinets #KitchenAppliances #KitchenAndBath #KitchenBench #WindowBlind #KitchenBar
