Do You Sand Between Coats Of Primer On Cabinets? Easy Tips

When it comes to refinishing cases, many people ask, “Do you sand between coats of primer on cabinets?”. 

To save money on painting projects, you might need some valuable tips, including priming. 

As a result, the article below will provide you with full information related to the topic.

Let’s scroll down.


Sanding cases (Source: diynetwork)

Do You Sand Between Coats Of Primer On Cabinets? A Quick Answer

Yes, following experts in painting, you should sand between coats of primers or paints. When the primers dry, they tend to have dust and dirt.

Then, suppose you want a perfectly smooth layer; you can use a sanding sponge or 220-grit sandpapers. After that, you are tacking and vacuuming the surface would help.

Should You Sand Between Coats Of Primer On Cabinets?

It would help if you used sandpapers or sanding sponges on cabinets or trims and doors to create a glossy and beautiful finish.

Plus, some types of primer might be harder to stick on the surface. Hence, sanding would be a great solution.

The first step to sand the case is to choose the sandpaper. Some well-known brands I suggest are:

With cabinets, 120-grit sandpapers are more than enough.

After you have already had sandpapers, warp a piece of them around a block. Then, slightly polish the priming coats with paper and a damp cloth. Then, wait for the surface to dry to continue to prime.

Besides, keep in mind that the priming paint needs from three to four hours to fully dry. Also, the ideal humidity for the substance not to be wet anymore is lower than 70 percent. The temperature is from 65 to 80 degrees.

Take a look at this video to know more about sanding between primer coats:

Other Useful Tips For Painting Cabinets Successfully

Cabinets (Source: diynetwork)

Besides rubbing sandpapers between primers, there are some helpful tips for you to do the painting project, including:

1. Using rosin paper

Before painting any household items, you should think about protecting them. You might not want to repaint all of them just due to the redundant stain.

Particularly with cases, I suggest you use rosin paper to protect their tops, doors, and backsplash.

The expected size of the paper is 140 feet in length and 35 feet in width. Suppose you have not used all of it; save the rest for the next painting project.

2. Pick up suitable primers

Buying a high-quality primer with a short drying time is the critical solution for a better kitchen case look. Plus, the product would shorten the time to complete the project.

When you buy the primer, keep in mind to look at the label on its container. That is to make sure the substance is suitable for your present paint. Plus, it shows the waiting period for the next coat.

3. Choose high-quality brushes

Similar to primers, the brushes used should be in good condition. If not, it might suddenly cause undesired problems such as brush strokes. Plus, give it a rest by cleaning the brush when you’re done.

That is to ensure your tool is ready for the next time.

Besides, according to experienced painters, you can dampen the brushes before using them. It’s like you have to take a shower every day before going to work.

Suppose you forget, not only your colleagues but also you would feel terrible. You might not want your present brush to remain the past dirt.

4. Shellac for spot-priming

I suggest you buy the shellac put in a spray can if you forget to prime any area. The substance dries relatively fast, sticks to, and covers most surfaces well.

Plus, suppose you have already sanded or patched the finish; the shellac would help.

5. Remove no needed stuff

It sounds obvious when you first hear this advice. However, you might be surprised that many people forget to remove the annoying stuff before painting.

For example, one of my friends has tried to repaint her cabinets recently. While she had taken all of her pans, pots, bowls, and other kitchen tools out of the closet, she kept the drawer fronts, doors, and hardware.

That was when she made her mistake.

Shortly after a few moves of the paintbrush, she deeply regretted it.

The unwanted paint covered the hardware and hinges quickly. When she kept trying, the color event spilled over the drawer’s fronts.

If you do not want to be in my friend’s case, take any stuff you do not want to paint out of the case. That would boost the item’s look overall.

Nevertheless, some people complained that they could not remove the drawer fronts. I suggest you buy masking tape to protect them. Covering their bottom and sides would cease your worry.

6. No over sanding

You might need to sand before painting and between each layer of primers or stains. But, that does not mean you should overuse sandpapers. Sanding bare wood is no need.

Besides, 120-grit sandpaper is more than enough for the case with a factory finish.

Suppose it has an old surface with the previous color; you can use the 100-grit paper first. After that, fine sand again with the 120-grit one to remove bumps and sanding marks.

7. Filling open grains

When it comes to wood cases, you should think about filling the open grains before painting. For example, oaks have many pores.

It is just fine if you do not have much time to fill the pores. However, because they are pretty easy to be noticed under paint, my advice is to remove them.

To do that, you can prime a few more times until they vanish. Do not forget to sand between those coats alike.

How Many Primer Coats Should You Use On Cabinets?

Priming (Source: homelyville)

When it comes to sanding between coats of primer, I also want to warn you about the suitable amount of skins.

In reality, you do not need too many priming paints. From one to three layers is more than enough to increase the paint’s adhesion and smooth and protect the surface.

For more details, if the case has a light color such as white, yellow, or orange, it only needs a single priming coat.

Also, keep in mind to wait around 24 hours for the primer to dry before painting. That is all you have to do to sufficiently protect and preserve the paint stuck to the case for a long time.

On the other side, I suggest using two or three coats of priming paint for dark-colored cases.

For example, you should give them another protective layer with black, espresso, or brown cabinets. Wait for roughly 30 minutes to 1 hour to sand the surface and keep priming.

Notably, you do not have to use more than three coats.

Neither that helps nor makes the case more beautiful.

For instance, that makes the waiting time longer than needed. Worse, the overused primer can be cracked or chipped off.

For this reason, one or two priming layers are the standard options.

More than three, and you might be in trouble.

Do You Sand Between Coats Of Primer On Cabinets? People Also Ask

1. Should I sand after the second coat of primer?

As I have just mentioned, you can sand between primer layers, either the first or second coat. 120-grit sandpapers often give a better result.

For example, it makes the surface smoother and flatter. It reduces the little globs and brush marks.

2. What happens if I do not sand before painting?

When you skip the sanding stage, there is a lot of dirt and contaminants left on the surface. Then, the paint can not stick well to the area, leading to a rough and less durable finish.

Plus, when you do not want sand, you might be unable to realize any undesired mistake on the item. The worse situation may be that the paint is chipped off after a few days, and you must repaint the device.

3. Which is better: Deglosser or sanding?

It mostly depends on your need to choose the suitable one. For example, the sanding method is better at keeping the uneven surface smooth.

On the other hand, the liquid deglosser removes the paint and stain faster. Plus, it saves more energy and time.

4. How long should I wait between primer coats?

Depending on the primer type, the dry times could vary. That means, suppose you use an oil-based primer; the period should last around 24 hours.

However, when it comes to the latex primers, the time is shorter. It could dry after approximately one hour. But, I suggest you wait about three to four hours for the next coat.


To sum up, above are a little information related to the question if you sand between coats of primer on cabinets.

It would be best if you used sandpapers or a sanding sponge between each priming layer.

That would help smooth the painted surface and give better results. But you should not overuse those papers. Plus, remember to choose high-quality brushes and primers.

Remove any stuff that is not relevant to the project.

Besides, fill in open grains appearing on the case. If you can, use the rosin paper and shellac alike.

Further Reading: 

Tags: #Polyurethane  #Closet #Brush #Coat #Primer #Waterproof #Paint #Spray #Blinds #Wood 

5/5 - (1 vote)
Exit mobile version